Skip to content
  • There are no suggestions because the search field is empty.

FlameScapes Spiral Fire Feature - Replace the Glass

Learn how to properly and safely replace the glass pieces on your Zippo FlameScapes Spiral Fire Feature

WARNING

  • Wear safety glasses
  • Wear cut/puncture-resistant gloves
  • Find a safe workspace to complete the following steps

GLASS REMOVAL

  • Perform the following steps carefully to avoid injury
  • Carefully remove Spiral Fire Feature from the box
  • Remove loose broken glass
  • Remove any packaging materials from each end and from the inside of the Spiral Fire Feature
  • Remove broken glass stuck in device
    • Ensure all glass pieces have been removed before moving on to next step

GLASS INSTALLATION

  • CAUTION: Glass is fragile. Handle with care and install slowly.
  • Before inserting new glass, ensure Spiral Fire Feature is in the upright position and device door is closed
    Image of the base of the FlameScapes with the glass positioned with the door closed.
  • Using two hands carefully guide the glass in between the curved metal wall and support spring tabs
    Person in disposable gloves fitting the glass cylinder into the FlameScapes base.
  • Ensure glass is fully seated against the bottom of the slot. Note: Glass has tolerances. If one end is too tight, flip over and reinsert.
    FlameScapes open to show how to properly close the glass.

DISPOSAL INFORMATION

  • Dispose or recycle responsibly according to relevant state and federal environmental laws and regulations.
Your Privacy Choices